MC74HC393AD |
RFQ for MC74HC393AD Required Field |
 |
| Technical/Catalog Information | MC74HC393ADG |
| Vendor | ON Semiconductor |
| Category | Integrated Circuits (ICs) |
| Logic Type | Binary Counter |
| Trigger Type | Negative Edge |
| Voltage - Supply | 2 V ~ 6 V |
| Number of Bits per Element | 4 |
| Number of Elements | 2 - Dual |
| Direction | Up |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC |
| Reset | Asynchronous |
| Packaging | Tube |
| Operating Temperature | -55°C ~ 125°C |
| Count Rate | 50MHz |
| Timing | - |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | MC74HC393ADG MC74HC393ADG |
| Product | Manufacturers | Pack | D/C |
| MC74HC393AD | - | SOP-14 | 04+ |
The MC74HC393A is identical in pinout to the LS393. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs.
This device consists of two independent 4bit binary ripple counters with parallel outputs from each counter stage. A ÷ 256 counter can be obtained by cascading the two binary counters.
Internal flipflops are triggered by hightolow transitions of the clock input. Reset for the counters is asynchronous and activehigh. State changes of the Q outputs do not occur simultaneously because of internal ripple delays. Therefore, decoded output signals are subject to decoding spikes and should not be used as clocks or as strobes except when gated with the Clock of the HC393A.
Features |
| • Output Drive Capability: 10 LSTTL Loads• Outputs Directly Interface to CMOS, NMOS, and TTL• Operating Voltage Range: 2 to 6 V• Low Input Current: 1 mA• High Noise Immunity Characteristic of CMOS Devices• In Compliance with the Requirements Defined by JEDEC Standard No. 7A• Chip Complexity: 236 FETs or 59 Equivalent Gates |
| Symbol | Parameter | Value | Unit |
| vcc | DC Supply Voltage (Referenced to GND) | 0.5 to +7.0 | V |
| VIN | DC Input Voltage (Referenced to GND) | 0.5 to VCC + 0.5 | V |
| VOUT | DC Output Voltage (Referenced to GND) | 0.5 to VCC + 0.5 | V |
| LIN | DC Input Current, per Pin | ±20 | mA |
| IOUT | DC Onput Current, per Pin | ±35 | mA |
| ICC | DC Supply Current Per Supply Pin | ±75 | mA |
| PD | Power dissipation in still air piastic DIP SOIC package |
750 500 450 |
mW |
| TSTG | Storage Temperature | 65 to +150 | °C |
| TL | Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package) |
260 | °C |
